How to Connect CallAudit Client to CallAudit Server Across your Local Area Network

CallAudit can operate in a client/server mode.  CallAudit Server  (or CallAudit Voice Pro) is setup on one PC with the CallerID hardware attached.  CallAudit Client (or CallAudit Voice) is setup on one or more other PCs.  When calls occur, they show on both the server and client PC locations at about the same time.

For this to work, the following is required:

• CallAudit Server (or CAV Pro) installed on one PC
• CallAudit Client (or CAV) installed on one or more other PC
• Local area network exists with static IP addresses for each PC
• Server has one or more client licenses installed
• Each client is set for client operation mode

To setup each client, do the following:

• Start client software
• System Preferences
• Hardware tab
• Select "Client Operation Mode" check box
• Press OK button

Then the client will look across your PC network for the server.  When found, it will connect automatically.  From this point on, each time client starts it will connect to the server.

To check for client licenses on server, do the following:

• Help menu
• Last "About ..." option
• Third line upper right
• This should show something like "n User Server System"

For client/server operation, n needs to be 2 or more.

Each PC in the network must have a licensed copy of CallAudit installed.  When client licenses are purchased from MSI, a license file is provided to set the Server for the maximum number of client PCs that can connect.  Multiple licenses for CAC or CAV can be purchased at a discount rate.